Soft Close Stays

Soft-down stay for downward-opening flap doors. Works well with short flap doors.
Simply installation by just aligning the stay with the sides and fastening with screws. (For single axis hinges and drop hinges)
Template makes installing the mounting plate easy.
When closing the flap, the damper provides no resistance and also has a lift assist function for easy lifting and operation (Type M and H only)
Non handed.
Placed at the bottom of interior of the cabinet, significantly reducing dead space.
By using the cover, both the body and the mounting plate will have the same color.

Unique bi-fold door mechanism
For upward-opening flap doors.
Holds position in fully opened and closed positions.
Soft-close function: slows down closing speed to prevent slamming
Arm length adjustable for various door sizes.
No tracks or guides required.
Handle can be installed at the bottom of the flap.

For downward-opening flap doors.
Built in damper slows down near 90° opening radius to prevent slamming.
Built in catch holds flap in closed position.
Can be used with concealed, piano, or butt hinges.
Use in pairs.

For downward opening flap doors.
Self closes if given a small push in opened position.
Equipped with damper to close gently and prevent slamming.
Built in catch to hold flap when fully opened and when fully closed. Flap will not lift up during installation.
Use in pairs

For top-opening flap doors.
Built in damper to prevent slamming during closing.
Built in catch holds flap in fully open position.
Can also be used with concealed, piano, or butt hinges.
Use in pairs.

Opens automatically if flap is pulled open slightly.
Built-in damper causes flap to open gently, preventing slamming.
Built in catch to hold flap when fully closed.
Can also be used with single axis hinges like concealed, piano or butt hinges.

For upward-opening flap doors.
Built in damper to prevent slamming during closing.
Built in catch holds flap closed.
Can also be used with concealed, piano, or butt hinges.
Use in pairs.

For upward-opening flap doors.
Built in damper causes flap doors to close gently and prevents slamming.
Built in catch to hold flap when fully opened and when fully closed.
Efficiently uses spaces: enough space left to install shelves.
Snap-in installation to mounting plate.
Mounting plate option for aluminium frame installation (sold separately).
Can also be used with single axis hinges like concealed, piano or butt hinges.
Use in pairs.

For upward-opening flap doors.
Built-in damper provides soft closing near closing radius, preventing slamming.
Flap door retracts inside cabinet, allowing other cabinets to be installed on top.
Successfully passed 30,000 open/close cycles in a private test.

Great solution for counter flaps at bars, restaurants, and receptions.
Built-in damper provides soft closing near closing radius, preventing slamming.
Damper will function even if released close to closing radius.
Lift-assist makes counter flaps feel light and easy to lift.
Can be retrofitted to existing counter flaps without a mortise.
Easy to align installation position using the included template.
Thin profile. When opened, unit has very small 35mm protrusion.
Successfully passed 100,000 open/close cycles in a private test.
Suitable flap thickness: 15 - 25 mm.
Maximum possible flap thickness by using spacer LAD-DP is 40 mm.

For over 25 mm thickness door.

A plate to reinforce the surface where the LAD Lift-Assist Damper or LAD-ST Arm Unit is mounted.

Ideal solution for counter flaps at bars, restaurants, and reception counters.
Smooth and soft close movement near closing radius prevents flaps from slamming. Damper function works even if the flap is only opened slightly.
Lift-assist mechanism with light opening.
Stops flap at 95° opening with stopper.
Suitable for flap thickness of 15 - 40 mm.
Can be attached to already installed counters without extra processing.
Installation position can be easily determined with the supplied template.

Ideal for counter flaps at bars, restaurants, and reception counters.
Smooth and soft close movement near closing radius prevents flaps from slamming. Damper function works even if the flap is only opened slightly.
Suitable for door moment of 25 - 50 N_m.
Lift-assist mechanism with light opening.
Stops flap at 95° opening with stopper.
Installation position can be easily determined with the supplied template.
Can be attached to already installed counters without extra processing.

For downward-opening flap doors.
Can also be used with concealed, piano, or butt hinges.
Designed to hold the door in closed position.
Successfully passed 50,000 open/close cycles in a private test.
Opening speed adjustable.
Torque Calculation :
-Torque = Door Height x 1/2 x Door Weight.
-Per Piece : 20 - 70 kgf·cm.
-Per Pair : 40 - 140 kgf·cm.

For top-opening flap doors.
Can also be used with concealed, piano, or butt hinges.
Opening angle adjustable from 70? to 105?.
Designed to hold the flap in a fully opened position.
Successfully passed 50,000 open/close cycles in a private test.
Closing speed adjustable.
Torque Calculation :
-Torque = Door Height x 1/2 x Door Weight.
-Per Piece : 20 - 70 kgf·cm
-Per Pair : 40 - 140 kgf·cm

For upward-opening flap doors.
Can also be used with concealed, piano, or butt hinges.
Opening angle adjustable from 80? to 100?.
Designed to hold the door in a fully opened position.
Type that holds the door at both 65° and 90° also available.
Successfully passed 50,000 open/close cycles in a private test.
Closing speed adjustable.
Torque Calculation :
--Torque = Door Height x 1/2 x Door Weight.
--Per Piece : 20 - 70 kgf·cm.
--Per Pair : 40 - 140 kgf·cm.

For downward-opening flap doors.
Can also be used with piano, butt, or drop hinges.
Built-in catch holds flap in closed position.
Successfully passed 30,000 open/close cycles in a private test.
Opening speed adjustable.

Soft-down stay for downward-opening flap doors. Works well with short flap doors.
Can also be used with piano, butt, or drop hinges.
Built-in catch holds flap in closed position.
Successfully passed 30,000 open/close cycles in a private test.
Opening speed adjustable.

For top-opening flap doors.
Built-in damper causes flap to close gently preventing slamming.
Built-in catch holds flap in fully opened position position.
Can also be used with concealed, piano, or butt hinges.
Depending on installation position, opening angle can be set to either 70?or 105?.
Successfully passed for the 30,000 open/close private cycle test.
Closing speed adjustable.

For upward-opening flap doors.
Built-in damper causes flap to close gently preventing slamming.
Built-in catch holds flap in fully opened position position.
Can also be used with concealed, piano, or butt hinges.
Depending on installation position, opening angle can be set to 80?, 90° or 100?.
Two stop version also available (adds another stop at either 60°, 65°or 70° depending on installation position)
Successfully passed 30,000 open/close cycles in a private test.
Closing speed adjustable.

For upward-opening flap doors.
Built-in damper provides soft closing near closing radius, preventing slamming.
When pulling the flap door out horizontally, will hold its position.
Flap door retracts above cabinet top and OV-1 is installed into frame, almost completely eliminating dead space.
Closing speed is adjustable.
Position adjustable post-installation (±1.5mm)
Ball bearing type slide rail provides smooth movement in rail section.

For upward-opening flap doors.
Provides lift-assist for light and easy lifting.
Built-in damper provides soft closing near closing radius, preventing slamming.
Flap door retracts above cabinet top when opened, greatly reducing dead space.

For upward-opening flap doors.
Built-in damper provides soft closing near closing radius, preventing slamming.
Flap door retracts above cabinet top when opened, greatly reducing dead space.

For downward-opening flap doors.
Built-in damper causes flap to open gently near fully open radius.
Non-handed.
SDS-C100 has a built-in catch to hold the door in a closed position.
SDS-100 does not have a catch and needs to have one installed separately.

For downward-opening flap doors. Works well with short flap doors.
Built-in damper causes flap to open gently near fully open radius.
Non-handed.
SDS-C100-TV has a built-in catch to hold the door in a closed position.
SDS-100-TV does not have a catch and needs to have one installed separately.

For top-opening flap doors.
Built-in damper causes flap to close gently preventing slamming.
Non-handed.
Built-in catch holds flap in fully open position.
3 types available:
-SDS-200: Opens 70°, works with single axis hinges.
-SDS-201: Opens 70°, works with multi axes hinges.
-SDS-210: Opens 105°, can be used with either single or multi axes hinges.

Can be used with SDS or NSDX-GZ.

For downward-opening flap doors. Works well with short flap doors.
Built-in damper causes flap to open gently near fully open radius.
Non-handed.
SDS-C100-TV has a built-in catch to hold the door in a closed position.
SDS-100-TV does not have a catch and needs to have one installed separately.

For downward-opening flap doors.
Unique swing down mechanism.
Spring powered to make flap feel light and easy to close.
Built in damper prevents slamming during closing.
Placed at the bottom of interior of the cabinet, significantly reducing dead space and not getting in the way when installing shelves.
Successfully passed 30,000 open/close cycles in a private test.

For upward-opening flap doors.
After pulling the flap forward 50 - 70mm, a spring will help gently lift the flap.
Soft close feature slows down closing speed and prevents slamming.
Placed at the top of interior of the cabinet, significantly reducing dead space and not getting in the way when installing shelves.
Successfully passed 30,000 open/close cycles in a private test.

Passed 30,000 cycles in a private test.
Designed to be installed at the center axis of rotating flap doors.
Simple design integrates well with frames for a sleek design.
3 different torque amounts to satisfy a wide range of flap doors.
Great solution for food showcases and acrylic displays.
When combined with the UDD-BKT, can be used for upward-opening doors.

Bracket of disk damper UDD for upward-opening doors.